Camber Bolts/Gauge

PowerAlign Camber Bolts make non-adjustable two-bolt suspension struts adjustable by up to +/-1.75degs of camber change. 

Available in 6 sizes

• PFA100-10 = 10mm x 70mm long
• PFA100-12 = 12mm x 60mm long 
• PFA100-12-70 = 12mm x 70mm long 
• PFA100-14 = 14mm x 70mm long 
• PFA100-15 = 15mm x 71.5mm long 
• PFA100-16 = 16mm x 75mm long 
• PFA100-17 = 17mm x 75mm long

Simply remove the original upper bolt, loosen the lower bolt, install and adjust the PowerAlign Camber Bolt to the desired camber degree and then tighten everything to the vehicle manufacturer's torque setting. This is an easy fix for camber issues and a perfect add-on for any suspension bush change. 

The bolts are made using a 12.9 tensile, high-strength steel and mechanical zinc-plated for corrosion resistance.