Camber Bolts

• PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/-1.75degs of camber change. 
• Simply remove the original upper bolt, loosen the lower bolt, install and adjust the PowerAlign Camber Bolt to the desired camber degree and then tighten everything to the vehicle manufacturer's torque setting. 
• This is an easy fix for camber issues and a perfect add-on for any suspension bush change. 
• The bolts are made using a 10.9 tensile, high strength steel that is zinc plated, offering resistance to corrosion. 
• These parts are also covered under the terms of our lifetime warranty.

Available in 6 sizes

PFA100-10 = 10mm x 70mm long

PFA100-12 = 12mm x 60mm long

PFA100-14 = 14mm x 70mm long

PFA100-15 = 15mm x 71.5mm long

PFA100-16 = 16mm x 75mm long

PFA100-17 = 17mm x 75mm long